If you have ever driven past a home where the front yard has a beautiful swimming pool and noticed that there is a vibrant green lawn surrounded by pebbles you would know that the UV water disinfection system is in place. Most of these systems use a combination of two different types of filters. The first is the ultraviolet lamp which uses a special filter to kill all forms of bacteria in your water. The second type of filter works with activated carbon to remove any organic material which could have stayed in the ground long enough for bacteria to grow.
When it comes to the ultraviolet water disinfection system itself, you will find that it comes in two different pieces. The first is a large ballast which sits on your faucet and has a collection chamber in place to catch the suspended particles which are released into your bathwater. Then there is the quartz sleeve which fits over the ballast and is responsible for capturing the suspended particles as they fall onto the filter. These two pieces work together to keep bacteria from invading your bathroom. You can check it out to see some Uv water dispensers.
One of the reasons that the UV water treatment system purification system is so effective is because it targets the most common forms of contamination in your water. These are known as trihalomethanes or THMs. There are many different types of gases that are classified as THMs, including the chloroform gas that is often found in our shower and bathroom faucets. Other types of gases include the volatile organic compounds or VOCs, which are formed when bacteria breaks down plant waste. These chemicals are thought to be carcinogens and can increase your risk of cancer by as much as 40%.
The UV water treatment system uses two filters to address the trihalomethanes that are produced. The first is the uv lamp, a small fluorescent lamp mounted on the inside of the UV lamp's casing. This lamp gives off UV radiation that kills the bacteria and prevents it from reproducing. The second filter is a second uv lamp designed specifically to filter out the VOCs. The lamp and the second filter must be placed at the proper distance from each other in order to achieve this effective synergy.
UV disinfection systems use two types of UV lamps. The first is called the pulsed-light device or PSD. This type of lamp produces three trillion watts of ultraviolet radiation. The second is the direct current UV lamp or DC UV. The DC lamp runs at a lower setting but uses up more energy than the pulsed light device. Both of these lamps are designed to give you the highest level of UV coverage possible. Visit https://supremewatersales.com/replacement-water-filters/replacement-water-filters-kits/watts-quick-change-filter-kits/ for further details on this systems.
Some of the additional features to look for include an auto shut-off timer, an ionizer, and even an indicator for the amount of usable water remaining in the unit. There are some systems that have an integrated lid that allows you to remove the filter and replace it while you are away from your desk. These units are often small, portable, and can be used to provide continuous coverage to a wide area. You should always have an on/off switch to ensure that the UV light is turned off when not in use. Make sure that the unit has a surge protector incorporated into the circuit as well. For further information, check out this reference post: https://en.wikipedia.org/wiki/Ultraviolet_germicidal_irradiation.